MAIN POWER RECEPTACLE ASSEMBLY. - Continued
(1) Remove receptacle access plate (1, Figure 5-2) from receptacle box (2) (inside shelter) by removing
attaching screws (3).
Figure 5-2. Main Power Cable Receptacle Assembly (Inside Shelter)
(2) Remove door and cover assembly (2) from main power service assembly by removing attaching screws (1).
(See Figure 5-4.)
(3) Tag and unsolder four main electrical wires of main power service assembly from terminals. Remove
conduit nut (4, Figure 5-2), conduit bushing (5), and wiring clamps as necessary.