4-37. DROP-OFF BOX ASSEMBLY.
This task covers:
General mechanics automotive tool kit
RTV Sealant (3, Appendix E)
Inspect drop-off box assembly of rear wall roadside for dents and security of mounting.
Inspect doors and hinges of rear wall roadside for dents, ease of operation, and proper closing.
Inspect paint work for bare metal and corrosion.
Inspect rubber gasket on exterior door for proper seal against door, for wear and weathering, and
Inspect latch and hook on exterior door for ease of operation and proper security of door.
Exterior Door. (See Figure 4-47.)
(a) Remove rivets (1) by drilling or chiseling off heads.
(b) Remove RTV sealant from exterior door (2) and wall.
(c) Remove exterior door (2) and spacer block (3).
(d) Remove rivets (4) from exterior door latch (5) by drilling or chiseling off heads.