SECTION V. UNIT TROUBLESHOOTING
4-9. GENERAL. This section contains unit troubleshooting information for locating and correcting common malfunctions
which may develop in the Finishing Section.
The Finishing Section contains voltages that are, dangerous if contacted. When troubleshooting, observe
all safety warnings and precautions. Make sure power is disconnected before replacing or repairing
electrical components. Failure to do so may result in serious electrical shock or DEATH.
Each malfunction for an individual component is followed by a list of tests or inspections which will help you to determine
corrective actions in the order listed. This manual cannot list all malfunctions that may occur, nor all tests or inspections
and corrective actions. If a malfunction is not listed, or is not corrected by listed corrective actions, notify intermediate
direct support maintenance.
4-10. UNIT TROUBLESHOOTING. Table 4-2 lists the common malfunctions which you may find during operation or
maintenance of the Finishing Section or its components. You should perform the tests or inspections and corrective
actions in the order listed.
Before you use this table, be sure your have performed all applicable Operator and Unit Preventive
Maintenance Checks and Services.