4-25. RIFLE RACK ASSEMBLY. - Continued
Apply adhesive (Appendix E, item 1) to bottom of replacement rubber mat (10), and position on
lower plate (11).
Secure lower rifle guide (9), rubber mat (10), and lower plate (11) with screws (8).
4-26. BLACKOUT BUZZER ASSEMBLY. Refer to Figure 4-29 for location of blackout buzzer assembly components
This task covers: Repair
General Mechanics Automotive Tool Kit, Appendix B
High voltage exists in the electrical system of this equipment. DEATH on contact may result if personnel fail to observe
Repair by replacing blackout switch.
Shut off ceiling light breaker (1) on power distribution panel (2).
Remove screws (3), lockwashers (4), flat washers (5), and switch plate (6).
Tag and unsolder wires (7) from blackout switch (8).
Remove nut (9) and blackout switch (8).
Position replacement blackout switch (8) and secure with nut (9).