4-24. PHASE MONITOR METER. - Continued
Repair by replacing circuit board. - Continued
Use wire color code to tag wires on the new circuit board the same as on the old circuit board.
Solder wires (11) and only the top row of wires (14) on replacement circuit board (32) to phase
indicator lights (13) and phase test switch (17).
Attach phase monitor meter (1) to shelter wall by securing flat washers (4), lockwashers (3), and
Turn on power and test operation.
4-25. RIFLE RACK ASSEMBLY. Refer to figure 4-28 for location of components and hardware of rifle rack assembly.
This task covers: Repair
General Mechanics Automotive Tool Kit, Appendix B
Repair by replacing upper rifle rack. (See Figure 4-28.)
Remove caps (1), screws (2), and upper rifle rack (3).
Position replacement upper rifle rack (3) over holes and secure with screws (2). Install caps (1).
Repair by replacing lower rifle rack. (See Figure 4-28.)
Remove screws (4) and lower rifle rack (5).
Position replacement lower rifle rack (5) and secure with screws (4).