TM 5-3610-294-13&P
4-23. POWER DISTRIBUTION BOX ASSEMBLY. - Continued
(10)
Connect line wires (7) and terminal wire lug extenders (6) to circuit breaker (8) and remove tags.
(11)
Position circuit breaker (8) in OFF position.
(12)
Position control panel assembly (5) on power distribution box assembly (16) and secure with flat
washers (4), lockwashers (3), and screws (2).
(13)
Request generator operator connect input power cable.
(14)
Request generator operator turn on generator, Module C supervisor set circuit breaker (8) to ON, and
test operation.
Figure 4-19. Replacing Circuit Breaker,
Power Distribution Box Assembly
4-48