2-14. ASSEMBLY AND PREPARATION FOR USE. Continued
Open hot and cold faucets (7) and place drain pump switch (16) in ON position. When hot water tank
and fresh water tank are empty, place drain pump switch (16) in OFF position.
The sink assembly rear door must not be opened when power cable is connected.
Failure to comply may result in DEATH or serious injury.
Place all switches in OFF position, turn off hot and cold faucets (7), and disconnect and stow drain hose
Disconnect sink assembly power cable (17) from wall outlet (18) and open rear door (19). Fully close hot
water tank drain valve (20) and close rear door (19).