AIR CONDITIONER ASSEMBLY. - Continued
Install screws (3).
While drilling holes, ensure drain hose behind right side of air conditioning housing
front panel is not damaged.
Check alignment of front vent door with opening in air conditioner
Using an electric drill and the six holes in the air conditioning housing front panel as a template, drill six 1/4"
holes through air conditioner housing.
Install six bolts (9, Figure 4-4), flat washers (8), lockwashers (7), and nuts (6).
Position shim (3) and front vent door (2) and secure with screws (1).
Install filter support (5).
Install filter (4).
Reconnect door holder bracket (2, Figure 4-3) and close cargo doors (1).
Open cargo door vent assembly doors.
Place air conditioner circuit breaker on power distribution panel in ON position.
Operate air conditioner.