TM 5-3610-220-14
Operator Maintenance Category
Daily Schedule (or weekly)
Interval and
Sequence No.
Before
During
After
Item to be
Paragraph
operation
operation
operation
inspected
Procedure
reference
12
Clean equipment
Remove all dirt, oil and grease from the
camera ways and skid. The ways should
not be left dry for any length of time. To
prevent corrosion, relubricate the ways.
Wipe the focusing glass with a soft cloth
and solvent.
13
Visual inspection
See that the external power cable is
disconnected from the camera and that
plug to transparency holder is removed.
Check that the focusing glass is in an open
position and that the vacuum back is
properly closed.
* 14
Lubrication
Inspect the camera for missing or damaged
lubrication fittings and for indication of
insufficient lubrication.
* 15
Tools and equipment
See that all tools and equipment assigned to
the camera are clean, serviceable, and
properly stowed in tool box.
* 16
Appearance
Inspect the general appearance of the
camera. Pay special attention to
markings and condition of paint.
* 17
Publications
See that a copy of this technical manual,
and all other publications associated with
the camera are in serviceable condition.
( ) be accomplished weekly.
3-4