TM 11-7025-210-23
4-64.
REMOVE/REPLACE POWER SUPPLY CAPACITORS AND REACTOR (CONT)
14.
Position power supply as shown.
15.
Remove screws, washers, and nuts.
16.
Lift off reactor.
Replace
NOTE
If you are replacing only one
component, do only the steps for
replacement of that component:
C1 capacitor (steps 1-4)
Motor start capacitor (steps 5-8)
L1 reactor (steps 9-15)
1.
Position capacitor in mounting bracket. Tighten
screw, washer, and nut.
2.
Replace wires. Replace and tighten screws and
washers.
3.
Install wire wrap.
4.
4-158