TM 11-7025-210-23
4-44. ADJUST LINEFEED SOLENOID (CONT)
7. Using needlenose pliers, pull out leads to paper out
8. Push ac plug into outlet.
WARNING
To avoid severe electric shock when cover is
up and power is on, do not touch anything
in power supply area.
9. To power on, pull up top cover interlock switch.
10. While pressing LINEFEED, look at solenoid.
Solenoid arm should engage clutch lobes for each
linefeed command.
11. Does solenoid arm engage clutch lobes at each
linefeed?
If yes, go to step 12
If no, go back to step 2
12. Pull ac plug from outlet.
13. Replace paper out switch leads (para 4-28, Replace,
step 1).
14. Tighten screws.
16. On control panel, press TEST button.
4-103