TM 11-7025-210-10
3-6. REMOVE/REPLACE RE-INKER
INITIAL SETUP
Supplies
Dry cloth
Isopropyl alcohol
Remove
1. Power OFF.
2. Open cover.
3. Hold tab on top of re-inker.
4. Tilt bottom inward. Pull up and out. Screw on storage
cap.
WARNING
Isopropyl alcohol, when used as a cleaning
fluid, is flammable. Keep away from heat
and open flame.
5. Wipe off ink with dry cloth. Dampen with isopropyl
alcohol if needed to remove ink from hands or line printer.
6. Store in location shown.
3-7