a. Support the camera with a tripod or tabletop
the lens for
stopped-down metering (para 2-
c. Attach the tubes, lens and camera body to each
other the same way you would attach a lens to the body
d. To focus for an exact actual-size image, set the
lens at infinity and move the camera back from, or
toward, the subject to get the sharpest view in the
e. Adjust focus ring for best obtainable final set-
2-25. Replacing Camera Set
in Carrying Case
a. Replace the optical components of the camera
set in the carrying case insuring that all parts are
seated firmly in the foam padding.
b. Roll the gadget bag up tightly so that it does not
protrude above the edge of the case.
c. Wrap the camera strap carefully around the
camera lens in its everready case.
sure that everything is in correct position.
e. Close the case and secure the latches before lift-
ing the case by the handle.