Figure 29.1. Projector, Still Picture PH-637B/PFP, bottom view. (Added)
Subparagraph (3), line 1. After "mountings," add: on the PH-
637/PFP and the PH-637A/PFP.
Add subparagraph (3.1) after subparagraph (3).
(3.1) On the PH-637B/PFP, a blower is mounted on each end of the
motor shaft. To remove the motor mountings, remove the two
blower mounting screws that secure each motor mounting to its
Page 58, paragraph 55. Make the following changes:
Subparagraph f(6), note. Delete the note and substitute:
Note. The PH-637A/PFP and the PH-637B/PFP each have a duct
attached to the inside of the bottom cover. On the PH-637/PFP, the duct
is fastened by clips and on the PH637B/PFP it is fastened with screws.
Subparagraph h, heading. After "Connector," add: (PH-637/PFP
Page 59, paragraph 55. Make the following changes:
Subparagraph i, heading. After "Support," add: (PH-637/PFP and