NOTE:
THE PH-637B/PFP IS EQUIPPED WITH A MALE PLUG CONNECTOR
INCLUDING A GROUND PIN.
Page 68, paragraph 51. Make the following changes:
Subparagraph d, line 2. C h a n g e " ( P H - 6 3 7 / P F P o n l y ) " t o : ( P H -
637/PFP and PH-637B/PFP).
Subparagraph f, line 3. Delete "screwed to" and substitute:
mounted on.
Page 51, paragraph 55. Make the following changes:
Subparagraph a(1), line 1. Change "PH-637/PFP" to: PH-
637/PFP and PH-637B/PFP.
Subparagraph a(2). After the last sentence, add : To remove the left-
hand shelf of the PH-637B/PFP (fig. 26.1), first remove the three
retainer mounting screws that hold the retainer strips to each side
of the projection stage and lift off the retainer strips. Carefully
lift the projection stage off the housing. Remove the three hinge
mounting screws and sheet metal nuts that hold the shelf hinge
to the housing; remove the left-hand shelf.
Figure 96.1. Projector, Still Picture PH-637B/PFP, projector housing. (Added)
8