TM 10-3610-203-14
Figure 6-1. Ladder Assembly Holddown, Removal and Installation.
c.
Installation. Install the ladder holddown as follows:
(1)
Fabricate replacement retaining strap as follows:
(a)
Cut three feet of cotton webbing to match previously removed retaining strap.
(b)
Machine sew loop ends and buckle to webbing.
(c)
Cut webbing end to receive clip and press clip to webbing.
(2)
Install the fastener loops through the ends of the retaining strap and secure the fastener loops to the
shelter wall with two screws each.
(3)
Position the ladder on the shelter wall and secure with the retaining strap.
6-2