Figure 5-8. Camera Film Case Retaining Clamp, Removal and Installation
Installation. Install the camera as follows:
Assure that the bellows is retracted and
both camera lights are installed.
Position the camera so that the aft side
faces the shelter door.
The camera should be moved very
carefully because of the close
Using two men, place the camera in the
forward portion of the shelter.
Position the camera, with the back toward
the right shelter wall, on the four shock mounts.
Secure camera base to the shock mounts
using four attaching bolts.
Move left camera light out against the
forward shelter wall and secure with attaching straps, if
bracket over the two floor receptacles and secure with
attaching bolts, if required.
Move camera light out to bracket and
secure with attaching straps, if required.
Drill and tap a film case cover retaining
clamp attachment hole in accordance with figure 5-9.