user is encourag
identifying materiel requiring segregation, reme-
tted on DA Form
dial care and preservation, or reclassification
C h a n g e s to Publications) and forwarded
Commanding General, U.S. Army E
action. Applicable requirements of the standard
may be used for performing receipt and preship-
mouth, N. J. 07703.
ment quality control inspections.
STORAGE AND SPECIAL INSTRUCTIONS
6. Preservation, Packaging, and Packing. Preser-
terioration during storage and is required to be
vation, packaging, and packing of the camera set
inspected and tested as specified in appendix D.
will be in accordance with the requirements
d. Precautionary Actions. When the camera
listed in appendix C.
set is being prepared for storage or issue, be
sure that there are enough personnel and suffi-
7. Marking. Marking of the camera set will be
cient moving apparatus available to eliminate the
in accordance with MIL-STD-129D.
possibility of damage to the equipment or injury
to the personnel.
8. Storage. a. Type. The preferred type of stor-
age environment for the camera set is a con-
9. Disposition of Rejected Materiel.
trolled humidity warehouse or heated warehouse.
materiel will be tagged and reclassified into the
b. Age Control. The camera set will be issued
proper condition code in accordance with AR 725
on a first-in-first-out (FIFO) basis by date of
-50. For other than new materiel, all defective
manufacture or date of rebuild. The dates can
units in a lot shall be repaired, or disposition re-
be established from the original pack date.
quested in accordance with AMC and depot pro-
c. Shelf Life. The camera set is subject to de-
Box, Wood, Cleated Plywood
Requisitioning, Receipt, and Issue
Box, Wood, Nail and Lock Corner
Preservation, Methods of
MIL-STD-105 Sampling Procedures and Table::
Fiberboard, Corrugated and Solid,
for Inspection by Attributes
MIL-STD-109B Quality Assurance Terms and
Tape, Gummed, Paper Reinforced
Fabricated Barrier Bags
Tape, Pressure-Sensitive, Adhe-
MIL-STD-129D Marking for Shipment and Storage
Tape, Pressure-Sensitive, Fila-
MIL-STD-147 Palletized and Containerized Unit
Strapping Steel. Flat and Seals
and Materials I-Ian
Box, Wood, Wirebound